Hard Roll Up Tonneau Cover REVOLVER X2

RELIABLE FIXATION
The Revolver X2 works like a roll-up trunk lid, but thanks to its clever design, it requires no Velcro or snaps. This creates a flush-fitting design and ease of use.

UNRIVALED SECURITY
BAK's patented pivoting locking rails allow the side mounting rails to automatically secure the lid to the truck bed when the lid is closed. A locked tailgate keeps the truck bed completely locked.

NO LIMITS
Simply roll the cover toward the cab to gain full access to the bed without removing it. The cover can be secured open while driving using two buckle straps at the front of the bed. The rear view mirrors are not obstructed.

CONVENIENT USE
Easy-to-use automatic latches secure the cover to the rear mounting rails on both sides of the truck bed. A pull on the cable on either side of the bed releases the cover and allows it to be rolled up.

WEATHERPROOF AND DESIGN
The Revolver X2 is vinyl coated, so water cannot penetrate the aluminum strips. Weather-resistant seals fit tightly to the bed rails, protecting the bed and its contents from the elements.

Installation WITHOUT DRILLING
Installing the Revolver X2 is as easy as pie, just align the guides and tighten the clamps. The cover bolts to the front of the body, then rolls out and locks to the rear of the body. No special tools are required.
- Durable aluminum construction with vinyl trim.
- Smooth, leather-textured finish.
- Patented pivoting locking rails secure the X2 to the full length of the truck bed.
- Provides full bed access when fully inverted against the bulkhead.
- Heavy-duty seat belts and tie-down straps to secure the lid when open.
- Full rear window visibility, even when open.
- Weather-resistant side rail seals and bulkhead seal.
- Rear corner guards add a sophisticated look.
- Work from either side with automatic latch.
- Compatible with most fifth-wheel hitches.
- 180 kg. (400 lb.) capacity (evenly distributed)
- Easy, no-drill installation.
- BAKBox 2 compatible (sold separately)
- 3-year warranty.
Looking for a pickup bed cover that combines the convenience of a soft roll-up bed cover with the security of a hard top? Check out the BAK® Revolver X2 Tonneau Cover, featuring aluminum-reinforced vinyl construction, an ultra-low profile, and intuitive operation.
BAK builds the Revolver X2 to last, thanks to an innovative interlocking aluminum slat design similar to a retractable cargo lid. On top of the Revolver X2's aluminum support structure is a heavy-duty marine-grade vinyl tarp with a leather trim that mimics the look of a traditional soft-sided pickup bed cover. This design not only protects your truck bed, but also provides the strength needed to support up to 180 kilograms of evenly distributed cargo.
The BAK Revolver X2 provides exceptional protection against theft and moisture. Premium seals on the bulkhead and side lid rails prevent excess moisture from entering the body, keeping your valuables clean and dry. Patented pivoting locking rails and automatic latches prevent thieves from picking, cutting and opening the X2.
The BAK Revolver X2 offers easy, no-drill installation thanks to the BAK clamp system. Operating the lid is just as easy: lower the tailgate and pull the cables to release the rear of the lid. Then rotate the tailgate toward the bulkhead to expose the platform. Once loaded, easily unfold the lid using the X2's pivoting guides and snap-on latches, or secure the lid in the open position with the integrated straps.
BAKBox 2
FOLDABLE & EASILY ACCESSIBLE



Full access to the body can be gained in seconds by simply folding the BAKBox 2 towards the front of the body. Access to the BAKBox 2 is possible from either side of the vehicle. When opened, latches automatically lock the box in place, making it easier to use.
SAFE DESIGN, ORGANIZED PICKUP BODY & WIDE VARIETY OF USES



The BAKBox 2 will be secured and hidden when the BakFlip or Revolver trunk lid is fully closed and the trunk door is locked, ensuring a tight fit and maximum protection. The BAKBox 2 is 25 cantimeters deep and 25 cantimeters tall, and can hold up to 90 kilograms while keeping everything secure and elevated off the floor of your pickup truck. A pull-out tray is included for even more organization. The BAKBox 2 is great for outdoor events. Fill it with ice and use it as a cooler or shelf to store items on the truck bed.
COMPATIBLE WITH BAK COVERS AND ROLLERS
- Solid core 1.25 cm thick FRP composite panels
- Folding design allows full bed access.
- Dimensions 25 cm wide by 25 cm high and across the bed (varies by truck)
- Includes slide-out tray for small/loose items.
- Designed for use with BAK® BAKFlip and Revolver Series cargo covers and rollers (sold separately).
- No-drill, clamp-on installation.
- Up to 90 kilograms. capacity
- 1 year warranty.
The BAKBox 2 from BAK® Industries is a low-profile miscellaneous storage box designed for use with the BAK Revolver (X2 and X4s) or BAKFlip Series (G2, MX4) lids and shutters.
The BAKBox 2 features a rugged, one-piece, 1.3-centimeter thick FRP (fiberglass-reinforced polymer) composite panel construction. This rugged construction can support up to 90 kilograms and accommodates most hand tools, emergency equipment, and other frequently used supplies. Each BAKBox 2 includes a slide-out tray to efficiently store small or loose items. When full bed access is required, the BAKBox 2 folds flush with your truck's bulkhead, allowing you to utilize your truck's entire cargo area.
With its easy, no-drill installation, the BAKBox 2 is quick and easy to install. All necessary clamps, fasteners and instructions are included for efficient and easy installation.
We invite car dealerships, car shops, service stations to cooperate.