Hard Folding Tonneau Cover MX4
.jpg)
FULL ACCESS
If you need to transport larger items, simply fold the cover toward the cab and secure it in place with the included rods. When not in use, the rods attach to an improved rail clamp, and rubber bumpers on the cover prevent it from smearing or scratching the rear cab window.
.jpg)
UPDATED SIDE GUIDES
The ribbed guides hold the lid in place when closed. These guides have rubberized end caps that prevent exposure of raw aluminum.
.jpg)
VERSATILE TAILGATE FUNCTIONALITY
Triple ribbed seals allow the tailgate to operate whether the lid is open or closed. The lid can be closed even when the tailgate is closed.
.jpg)
MATTE BLACK FINISH
All-new matte black finish provides superior scratch resistance and UV protection.
.jpg)
NO DRILLING
The MX4 can be installed in less than an hour without drilling into the truck bed.
.jpg)
EASY TO USE
Each panel automatically locks into place on the lid's mounting rails when the lid is closed. The latches are released by simply pulling the cable.
- Heavy-duty aluminum top panels.
- Heavy-duty yet lightweight aluminum rails.
- Smooth textured matte black finish.
- Upgraded support bar clamps for secure retention.
- Folds toward the cab for 100% bed access.
- Premium rubber bumpers on the lid prevent it from smearing or scratching the rear cab window.
- Automatic snap-in panels.
- Full cab brake light visibility in all positions.
- Easy, no-drill installation.
- Allows full bed access.
- Pre-fabricated corner caps with softer seal for a more finished look.
- Premium EPDM rubber seals all around.
- Integrated water drainage system.
- 180 kilograms load capacity (evenly distributed)
- Compatible with BAKBox2
- 5-year warranty.
Sleek, reliable and durable – what more could you want from a premium sectional pickup bed cover? The BAKFlip MX4 Bed Cover from BAK® is all of that and more.
The BAKFlip MX4 is constructed entirely of alloy materials, including durable aluminum top panels and side rails. Unlike a soft-folding trunk lid, the MX4's durable aluminum construction is resistant to cuts and slashes, preventing thieves from damaging the trunk lid or accessing your valuables.
The BAKFlip MX4 also features BAK's patented auto-locking side rails that automatically lock the MX4 panels to prevent thieves from prying the edges of the cover and gaining access to the bed. No matter what you're hauling, you can rest assured knowing your gear is securely protected with BAK pickup bed covers.
If you're worried about inclement weather, don't worry. The BAKFlip MX4 is as good at keeping out moisture as it is at keeping out thieves. High-quality EPDM rubber seals around the perimeter prevent leaks between the lid and the sides of the bed, while a dual-action tailgate seal protects the tailgate from the elements. This innovative design also improves operation, allowing the tailgate to be opened and closed regardless of the lid's position.
The BAKFlip MX4 is not only durable, it’s also sleek and stylish. Unlike its competitors, the BAKFlip MX4 sits flush with the bed rails of your truck, virtually disappearing into the profile of your vehicle. And with a smooth, textured matte black finish on all surfaces, the MX4 looks great whether it’s open or closed.
The BAKFlip MX4 is quick and easy to install with the included clamp system and instructions. Using the cover is just as easy: lower the tailgate, pull the cable, and fold the cover against the bulkhead. If full access to the body is required, fold the cover flush with the rear window and secure it with the integrated supports and upgraded clamps.
BAKBox 2
FOLDABLE & EASILY ACCESSIBLE
Full access to the body can be gained in seconds by simply folding the BAKBox 2 towards the front of the body. Access to the BAKBox 2 is possible from either side of the vehicle. When opened, latches automatically lock the box in place, making it easier to use.
SAFE DESIGN, ORGANIZED PICKUP BODY & WIDE VARIETY OF USES
The BAKBox 2 will be secured and hidden when the BakFlip or Revolver trunk lid is fully closed and the trunk door is locked, ensuring a tight fit and maximum protection. The BAKBox 2 is 25 cantimeters deep and 25 cantimeters tall, and can hold up to 90 kilograms while keeping everything secure and elevated off the floor of your pickup truck. A pull-out tray is included for even more organization. The BAKBox 2 is great for outdoor events. Fill it with ice and use it as a cooler or shelf to store items on the truck bed.
COMPATIBLE WITH BAK COVERS AND ROLLERS
- Solid core 1.25 cm thick FRP composite panels
- Folding design allows full bed access.
- Dimensions 25 cm wide by 25 cm high and across the bed (varies by truck)
- Includes slide-out tray for small/loose items.
- Designed for use with BAK® BAKFlip and Revolver Series cargo covers and rollers (sold separately).
- No-drill, clamp-on installation.
- Up to 90 kilograms. capacity
- 1 year warranty.
The BAKBox 2 from BAK® Industries is a low-profile miscellaneous storage box designed for use with the BAK Revolver (X2 and X4s) or BAKFlip Series (G2, MX4) lids and shutters.
The BAKBox 2 features a rugged, one-piece, 1.3-centimeter thick FRP (fiberglass-reinforced polymer) composite panel construction. This rugged construction can support up to 90 kilograms and accommodates most hand tools, emergency equipment, and other frequently used supplies. Each BAKBox 2 includes a slide-out tray to efficiently store small or loose items. When full bed access is required, the BAKBox 2 folds flush with your truck's bulkhead, allowing you to utilize your truck's entire cargo area.
With its easy, no-drill installation, the BAKBox 2 is quick and easy to install. All necessary clamps, fasteners and instructions are included for efficient and easy installation.
We invite car dealerships, car shops, service stations to cooperate.
